On this page, we will guide you on how to install the official stock ROM flash file on your Lenovo TB-X606F. Well, the device is based on Android 10.0 which is powered by the MediaTek Helio P22 processor. This guide will be helpful to unbrick or fix any software issues on your device.

To install the firmware flash file on Lenovo TB-X606F, you need to download the software called SP Flash tool (also known as Smartphone flash tool). This method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the firmware file.

Also Read

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Lenovo Tab M10 FHD Plus Wi-Fi Stock ROM flash file on your computer.

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adwares from Lenovo Tab M10 FHD Plus Wi-Fi
  • You can fix the boot loop issue on Lenovo Tab M10 FHD Plus Wi-Fi
  • Fix Unfortunately, the app has stopped errors on Lenovo Tab M10 FHD Plus Wi-Fi
  • Fix Network related issue
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • You can unroot Lenovo Tab M10 FHD Plus Wi-Fi
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
  • Restore Lenovo Tab M10 FHD Plus Wi-Fi back to Factory State

How to Flash Lenovo TB-X606F Firmware Flash File

Before installing the Stock ROM on your Lenovo Tab M10 FHD Plus Wi-Fi, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Pre-Requirements:

  • Supported device: Lenovo Tab M10 FHD Plus Wi-Fi TB-X606F
  • Make sure to charge your device more than 50%
  • You need a PC or Laptop with a USB cable.
  • Take a complete backup of your android phone
  • Download Drivers and Tools: VCOM drivers, SP Flash Tool, and Lenovo USB Drivers

Download Flash Files

Instructions to Install: via SP Flash tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

  • Make sure you follow and download all the required files and flash tool on your PC.
  • Open the flash tool exe file to open the SP Flash Tool User Interface
  • Once your load the SP Flash tool UI, Tap on the Download option
  • In the download tab, you have to load both the download agent and the scatter text file in the scatter-loading section.
  • You will find the scatter text file inside the ROM package for most cases, if not, you can create a scatter text file on your own.
  • Once you load the file, click the Download button
  • To start the upgrade process of stock ROM on your Lenovo Tab M10 FHD Plus Wi-Fi, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  • When the phone connects, your device will start upgrading the stock firmware
  • You need to wait for a few minutes to complete the upgrade process.
  • Once the flashing process completes, you will find a green button which means a successful upgrade.
  • That’s it! You can reboot your Lenovo Tab M10 FHD Plus Wi-Fi

Follow our full-depth video guide below:

That’s it, guys. We hope that you’ve installed the Stock Firmware on your Lenovo TB-X606F device successfully. Feel free to ask in the comments below for any queries.